Q1-Make a Simulink model of Doorbell using solenoid block with the following details:   In the above arrangement, when the switch is closed the electromagnet receives electrical power from the battery and pulls the metal arm to hit the bell producing sound.  Create a situation where the switch is closed for 2 seconds and…

Q1 - Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then…

Aim - Objective: To model a fan type load in Simulink and to control its speed by using the PWM method.   Solution :-   PWM Controlled Fan load using Dc motor   Solution :-   This is the good example of electromechanical  system By controlling the electrical parameter of motor result in change…

AIM: To create a basic Electric Vehicle model using MATLAB/Simulink OBJECTIVES:         1. Explain System-level configurations.        2. Explain each model parameters & blocks.        3. Comment on results.        4. Conclusion.…

AIM: To carry out a system-level simulation of an all-terrain vehicle using Simulink.   OBJECTIVE: To prepare a technical report on BAJA ATV explaining model properties for the following:  - without using Lookup table - using Lookup table   THEORY:  ATV: An all-terrain vehicle (ATV) refers to a motorized single-seated…

Solution   Program   #include <stdio.h> //header file#include<stdlib.h> struct node {int data;struct node *next;//self referential structure or linked list structure }*num1,*num2,*tmp,*ptr; //global variableint main(){printf("First group element should be less than 7\n Element should not repeat more…

Overview of the Project:  In this project implementing the Code for “Interfacing a 16*2 LCD with two Arduino’s (one for Master and one for Slave) using Inter-Integrated Circuit (I2C) communication protocol” by sending the message to LCD using I2C communication protocol and display the message on…

Overview of the Project:  In this project the implementation of code for “Measuring distance of an object using ultrasonic distance sensor (28015 Ping) and also smoothen the sensor data using moving average filter”. Goals: Measuring the distance in terms of inches of an object using Ultrasonic Distance…