Overview of the project: In mathematical set theory, a set is defined as a collection of elements which may be mathematical (e.g. numbers, functions) or not. If there are two sets, A and B, then A U B (A union B) is the collection of all the elements of A as well as all the elements of B. A ⋂ B (A intersection B)…

Answer: The project is an implementation of retraction and extension of an airplane's landing gear using finite state machine. An airplane has three landing gears, nose gear, left gear and right gear. All three landing gears are controlled by the pilot in the cockpit using a lever which moves up or down. There are limit…

Answer:The I2C protocol involves using two lines to send and receive data: a serial clock pin (SCL) that the Arduino Controller board pulses at a regular interval, and a serial data pin (SDA) over which data is sent between the two devices. As the clock line changes from low to high (known as the rising…

Answer: The SEN136B5B is an ultrasonic range finder from Seeedstudio. It detects the distance of the closest object in front of the sensor (from 3 cm up to 400 cm). It works by sending out a burst of ultrasound and listening for the echo when it bounces off of an object. It pings the obstacles with ultrasound.…

The detailed test plan for the testing is given below: TABLE OF CONTENTS   Test Objective Scope of Testing In-scope features Out-of-scope features Roles and responsibilities Schedule of tests Assumptions Risks Mitigation/Contingency plans Test Methodology Test approach Entry criteria Exit criteria Test environments…

Answer 1(a): The test manger report for the static analysis of the file Testrain.c is attached below as jpeg 1.0, 1.1 and 1.2:   Answer 1(b): The flowgraph and test case generation midway through the integration test are attached below as jpeg 2.0 and 2.1. The result of the completed test and regression report for…

PROJECT OVERVIEW:-  We are going to implement a system for controlling a DC motor using the L293 driver and Monitor and print the running status of motor in the LCD screen by using the SimulIDE.   GOALS:- As we are implement a system on simulator for controlling the DC motor using L293 motor driver. By using…

PROJECT OVERVIEW: We are going to implementation of code for “Measuring distance of an object" using ultrasonic distance sensor (HC-SR04) and Atmega32 Microcontroller in which real time distance is sensed by an ultrasonic sensor and displays measured distance on an LCD display by using the SimulIDE.   GOALS:…

Project Objective – By using STM32 IDE Nucleo F401RE board, I have done a project to turn ON a LED for 1 second when a push button is pressed. I/O selection – Pin_13 from Port C has been selected to read the input from the push button. Pin_5 from Port A has been selected to write the output to the LED LD_2.…