3D house plan using REVIT.

1. 1. How will you assign Circular section to column? So in order to assign the circular section to the column first we need to go to the properties panel. Then click on the option Define. Then there will be another dialogue box called property in that dialogue box select the option Circular section from the given list.…

1. Write the steps involved to upload a .std file through web mail? Steps involved to upload a .std file through web mails are as follows; Open the STAAD pro software and locate the share option available on the introduction screen. After clicking on the share button, select send mail option. Then, browse for the. Std…

1.Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class. PROCEDURE:   Download the NavisworksExporters2024.exe  set up file Open the Revit file which we want to export…

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. AIM: To create a set of sinusoidal points, a curve and a surface out of the curve using dynamo. INTRODUCTION:- Creation a set of sinusoidal points, curve and to creation a surface out of the curve is going to be…

  1.Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. AIM: To create a 3D Furniture element as shown in the Figure. PROCEDURE Open AutoCAD and click the workspace icon Enter Units and limits Line command is used to draw the 3D object Command-line draw 2'6" in the Z direction Line…

AIM:-   Creating 3D Isometric view of various structural elements in AutoCAD Create a 3D Isometric View of the building with plan and elevation given. stepwise procedure:- command or tool used: For 2D: line offset trim explode rec move copy For 3D: Boundary region EXT pressfull subtract union move  3D rotate........ETC.…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level 2) Model a roof above the ceiling by selecting the footprints of the ceiling. Using the adjustment toolbars appearing on-screen adjust the roof slope to 10 degrees.

1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School From the above options i selected the 'OFFICE BUILDING'. 2) Assume reasonable assumptions for geographic and location details for your project modeling. Based…

Aim: To create layout of the Plan and Section A of the project in Challenge 7 as shown in the figure above, in AutoCAD. Introduction: The layout is created in AutoCAD using the template Tutorial-mArch.dwt in a scale as given in the Figure. The procedure is explained in detail with diagrams of each step and the final result…

AIM: To create Templates ,Door blocks, Symbols legend and Table's using Autocad.    

AIM: To create an  Architectural drawing consisting of Floor plan, Elevations and Sections for the plot size 60'x20' and also create the structural drawings for Column, Footing and Beam. INDRODUCTION: To draw an architectural and structural drawings in an Autocad. Plot size: 60'x20' . Orientation: East facing Command used: Line…

AIM : To sketch a plan of G+1 floor residential building according to Vaastu Shastra and listing down the names of the structural drawings required to be provided to the construction site.   INTRODUCTION TO VAASTU SHASTRA :-      Vaastu Shastra :- Vastu Shastra is the Ancient Indian Science of architecture and acts as…

AIM: To create the concrete mix design for M35 grade concrete with fly ash. INTRODUCTION: The Process of selecting suitable ingredients of concrete (cement, fine aggregates and course arrgegate mixed with water ) and determining the relative quantities with an objective of producing a concrete of required strenght , durability…