Creating a Floor plan, Footing detail and Isometric view using AutoCad

AIM : To Create the plan , footing details and isometric view by using AUTOCAD.

PROCEDURE:

Q-1: CROSSECTION OF FOUNDATION FOR LOAD BEARING WALL.

• In this drwaing we create a C/S of foundation details for load bearing wall.
• Now we can see the command used for this drawing as step by step.  

 Steps:

1. First check the dimension as we start before line.
2. Next start with a L line command.
3. Draw a line as per dimension.
4. After completing the drawing we need to show dimensions of footing.
5. Click " DIM " command to create a dimension.
6. And once dimension and naming is done using " TEXT " command  then using snipping tool take a screenshots of drwaing in autocad.
7. finally click save as to save picture.

Q-2: CROSSECTION OF FOUNDATION FOR LOAD BEARING WALL OVER SPREAD FOOTING :

• In this drwaing we create a C/S of foundation details for load bearing wall over spread footing.
• Now we can see the command used for this drawing as step by step.  

 Steps:

1. First check the dimension as we start before line.
2. Next start with a L line command.
3. Draw a line as per dimension.
4. After completing the drawing we need to show dimensions of footing.
5. Click " DIM " command to create a dimension.
6. And once dimension and naming is done using " TEXT " command  then using snipping tool take a screenshots of drwaing in autocad.
7. finally click save as to save picture.

Q-3: CROSSECTION OF ISOLATED FOOTING :

• In this drwaing we create a C/S of isolated footing.
• Now we can see the command used for this drawing as step by step.  

 Steps:

1. First check the dimension as we start before line.
2. Next start with a L line command.
3. Draw a line as per dimension.
4. Here we use F8 for othomode command to draw inclined line.
5. For stirups/ rings we use " ARRAY " option to multiple line  to draw in row.
6. After completing the drawing we need to show dimensions of footing.
7. Click " DIM " command to create a dimension.
8. And once dimension and naming is done using ' TEXT ' then using snipping tool take a screenshots of drwaing in autocad.
9. finally click save as to save picture.

Q-4: LINE DIAGRAM OF TWO BEDROOM BUILDING :

• In this drwaing we create a line diagram of two bedroom building.
• Now we can see the command used for this drawing as step by step.  

 Steps:

1. First check the dimension as we start before line.
2. Next start with a L line command.
3. Draw a line as per dimension.
4. Using text command mention the rooms name.
5. Using mirror command to mirror the object to the ooposite side.
6. Here we use F8 for othomode command to draw inclined line.
7. For stirups/ rings we use " ARRAY " option to multiple line  to draw in row.
8. After completing the drawing we need to show dimensions building objects.
9. Click " DIM " command to create a dimension.
10. Use " CONTINOUS DIMENSION "  & " MATCH PROPERTIES " for same alignement of dimension , for text height, width at same values.
11. And once dimension and naming is done then using snipping tool take a screenshots of drwaing in autocad.
12. finally click save as to save picture.

Q-5: ISOMETRIC VEIW OF STEPS :

• In this drwaing we create a Isometric Veiw of Steps.
• Now we can see the command used for this drawing as step by step.  

 Steps:

1. First check the dimension as we start before line.
2. Click on ISOMETRIC DRAFTING to create a isometric veiw.
3. Next start with a L line command.
4. Draw a line as per dimension.
5. In Isometrc veiw we have 3 option to draw namely Isometric Right , Isometric Left , Isometric Top used for draw lines.
6. Isometric right goes in right,top and straight.
7. Isometric left goes in left,top and straight.
8. Isometric Top goes on top, left, right.
9. After completing the drawing we need to show dimensions of objects.
10. Click " DIM " command to create a dimension.
11. And once dimension and naming is done using ' TEXT ' then using snipping tool take a screenshots of drwaing in autocad.
12. finally click save as to save picture.

Q-6: ISOMETRIC VEIW OF GABLE WALL :

• In this drwaing we create a Isometric view of Gable wall.
• Now we can see the command used for this drawing as step by step.  

 Steps:

1. First check the dimension as we start before line.
2. Click on ISOMETRIC DRAFTING to create a Gable wall.
3. Next start with a L line command.
4. Draw a line as per dimension.
5. In Isometrc veiw we have 3 option to draw namely Isometric Right , Isometric Left , Isometric Top used for draw lines.
6. Isometric right goes in right,top and straight.
7. Isometric left goes in left,top and straight.
8. Isometric Top goes on top, left, right.
9. After completing the drawing we need to show dimensions of objects.
10. Click " DIM " command to create a dimension.
11. And once dimension and naming is done using ' TEXT ' then using snipping tool take a screenshots of drwaing in autocad.
12. finally click save as to save picture.

RESULT : Isometric Views of given objects are shown in above figures.