Week 8 - Challenge 6 - Core & Cavity Design

Define tooling direction     Ans -    Explaining the Draft Analysis and the Tooling Axis creation. after that we need to perform Draft Analysis on CLOSED PART BODY and for that we need to attach Axis System to TOOLING AXIS after that we need to see the our surface having what Draft…

AIM:To create a parametric structure with the publication command for the given class A surface of the tail lamp lens SOFTWARE USED: Catia V5 PARAMETRIC STRUCTURE TREE: CHECKING THE INPUT - A SURFACE:   The A-surface or the styling surface is first checked for any gaps and other issues in its surfaces. This Surface…

                                       ADVANCED SHEET METAL DESIGN OF BOX ASSEMBLY USING SIEMENS NX CAD OBJECTIVE: To design a sheet metal box assembly using Siemens NX Cad. To create a drafting of the same part in A4 sheet. …

itle of the Project: Advanced Sheet Metal Design Using NX  Objective: To design a Sheet metal Metal bracket-II using Siemens NX CAD application   Introduction: Sheet metal: Sheet metal is metal formed by an industrial process into thin, flat pieces. Sheet metal is one of the fundamental forms used in…

Title of the Project :- Advanced Sheet Metal Design Using NX Cad Bracket in the model. Objective :- Design a Bracket using by NX cad sheet metal application. Introduction :- Sheet metal design provide the design profession with a complete set tools to efficiently create and manage sheet metal part based on the knowledge…

Designing a Sheet Metal Odd Enclosure using NX OBJECTIVE The objective of the project is to design a sheet metal odd shaped enclosure using Sheet metal application in Siemens NX and a drawing sheet needs to be drafted for the designed model using drawing application in NX. INTRODUCTION it is an basic form of metal having…

Title of the project: Advanced Sheet Metal using NX cad Challenge 1 Casing Design. Objective: To design a Sheet metal Casing Design using Siemens NX Sheet metal Application. Introduction:1. Sheet metal: It is formed by an industrial process into thin, flat pieces, It is one of the fundamental forms used in metalworking…

AIM: To Design the outer upper and lower panel, inner panel with the necessary reinforcements by following the Master section with the design parameter for the given class A surface with software CATIA V5.  INTRODUCTION: A door is a hinged part which is used for entry and exit of the vehicles. Back doors are one of…

AIM: To design a butterfly valve and apply to apply  GD&T symbols to the drawing and finally to apply all the parts in the butterfly valve to make it as one assembly file and the assembly consist of all the parts. this process are done by  using CATIA V5. DESIGNING SOFTWARE: CATIA V5 INTRODUCTION: A butterfly…

Aim: To design & develop the Roof of a car with its components by following the master section and design parameters. Objective: To develop the essential flanges and reinforcements using roof styling as input. To do a curvature study on the roof and perform calculations to determine the position of the Bow-roof. To determine…

Development of aDOOR TRIM PANEL using CATIA- V5   Creation of CAD model considering following inputs as like in OEM and tier1 companies a) Class A surface b) Nominal thickness : Refer master sections c) Attachment strategy :  Find a attachment strategy for the door panel complete work. Use Push pin with Dog house…

Development of aDOOR TRIM PANEL using CATIA- V5   Creation of CAD model considering following inputs as like in OEM and tier1 companies a) Class A surface b) Nominal thickness : Refer master sections c) Attachment strategy :  Find a attachment strategy for the door panel complete work. Use Push pin with Dog house for Lower…

WHAT EXACTLY FENDER IS...? WHILE Fender is a front outerside member of a car, which covers the wheel side. It has so many small features with ups and downs.The binder surface is not a planer one in this case. This is because to reduce the draw depth and it has two rows of draw beads. Itseems to be difficult to form due…

WHAT IS FENDER STANDARDS :- Fender Standards are Kept On Consideration Of Pedestrian Safety...Because when a car Moves at an Perticular Speed take an Example of 60 km/h then obviously the wheels of car throw some Debris, Mud,Sand,Stones and due to this Pedestrians May meet With an Accidentor any body who is near to Moving…

Section Modulus calculation and optimization Aim: The main objective of this project is to understand and learn the basic tools and advanced tools used in NX and calculation as well as section modulus and optimization of Car Hood.   Section modulus is a geometric property for a given cross-section used in the design of…

                                                                                                                       AUTOMOBILE HOOD DESIGN   Introduction: Hood The Hood is the outer panel covering the front engine of the vehicle. It opens to allow access to the engine compartments for the ease of maintenance or repair…

UNDERBODY COATING :- WHAT IS EXACTLY UNDERBODY COATING :- Underbody Coating means a coating labeled and formulated for application to wheel wells, the inside of door panels or fenders, the underside of a trunk or hood, or the underside of the motor vehicle. Underbody coating provides long term protection from corrosion…

BENCHMARKING: Benchmarking is the continuous process of measuring one’s own product, services and ac­tivities against the best level of performance. These best levels of performance may be found either inside one’s own organisation or in other competing organisations or in organisations having similar processes. TYPES…

MODEL 1- Part 1- Sketch Of part 1 After Padding   Part 2-   After padding     Part 3- Sketch After padding     Part 4- Sketch After padding     Part 5- Sketch After Padding     Assembly- 2D Drawings- MODEL 2- Part 1- Sketch Of part 1 After Padding   Part 2- Sketch…

DESIGNING A PILLAR USING MASTER SECTION OBJECTIVES To improvise the Class A surface by resolving bad patches and adding flanges to it.  To create A pillar solid model with the help of  improvised class A surface. To create B side features for the A Pillar using the master section given to us as an input. To create…

DOOR TRIM LOWER WITH ENGINEERING FEATURES (HEAT STAKES AND LOCATORS) The aim of the project is to design a solid body from the given class A surfaces by creating tooling axis, B and C surface  then do the draft analysis for the same then conclude the result by adding engineering features like heat stakes and the locators.…

Create the Dog House for the Door Trim considering the design rules   INTRODUCTION DOG HOUSE Dog house is an engineering feature used in plastic design. Dog houses are used as support feature. Sometimes other engineering features like snaps, locators, screw bosses are mounted on them to increase their strength. Dog…

Rib & Screw Boss are the Engineering Features which is on "B surface",They have some Design Rules to avoid Plastic defects.           1)RIBS:- Ribs are usually design to Improve Strengtth of Plastic Part without increasing the thickness of the component.         2)Screw Boss :- It helps to screw component together.Screws…

Tooling Axis:- To Import Class A surface in the drawing. Using intersection method and bisecting line method created Tooling Axis.     Explaining the Draft Analysis and the Tooling Axis creation. after that we need to perform Draft Analysis on CLOSED PART BODY and for that we need to attach Axis System…

  To create a body of Bumper from the input given which was the A-surface of a Bumper. The created body should be a closed solid volume which should be feasible for manufacturing and Tooling. The draft angle and draft analysis of the component should be done. In model, proper tree structure to be maintained and…

OBJECTIVE: To design coin holder with respect to the given class a surface. Create class B surface and class C surface and the tooling Axis for the same. Convert those sub-surfaces into a close body and make it into the solid body for that provide the thickness of 2.5 mm. Performing draft analysis to verify the creation…

Tooling Axis:- To Import Class A surface in the drawing. Using intersection method and bisecting line method created Tooling Axis.     Explaining the Draft Analysis and the Tooling Axis creation. after that we need to perform Draft Analysis on CLOSED PART BODY and for that we need to attach Axis System…

REPORT FOR AN BASE BRACKET -                                 Explaining the Draft Analysis and the Tooling Axis creation.   after that we need to perform Draft Analysis on CLOSED PART BODY and for that we need to attach Axis System to…

Aim =  Programme to simulate the forward kinematics of 2R robotic arm create an animation file on plot and uploading animation   Theory =   Step wise explanation of code firstly we need to give inputs  i.e. values of l1 & l2 , theta1 & theta2. now we get 3 coordinates from the fig and the…