objective:   the given component  create mesh on the component and  the 1d elements such as bar ,beam,rod with given cross section . procedure step 1;  import the model as as iges mode. step 2 : after importing model delete all the solid parts then create the mid surface  of each bracket.…

WEEK 6 CHALLENGE OBJECTIVE :  generate seperate midsurface of each component and 2D meshing of component and check the quality of mesh of the given parameter and model check. procedure:  import the geometry of given challenge in .hm there are four parts in this component  1 inner extract 2 outer extract…

WEEK 8 CHALLENGE REPORT OBJECTIVE:Create 3d tetra mesh of the given component with given parameters. procedure:  there are two methods to create 3d tetra mesh 1. convertion of 2d shell element to 3d element. 2. second one is directly from 3d panel >tetramesh    2d to 3d converstion explained below:  …

week9 challenge objective:mesh the given components at given parameters and create the connectors on the components and Attach the various parts of the given model . procedure: step1 : mesh the  all component at given parameters and check quality creteria and fix those element. step2:  create the connectors on the component…

project -1 report objective: mesh the given component and assign thickness for the component. procedure: first  imported the geometry  of the given challenge. then checked for the free edges on the model . checked component 3 or more surface thickness and chosed manual midsurface. for the manual midsurface…

project -2 report objective: mesh the given component and assign thickness for the component. procedure: first  imported the geometry  of the given challenge. after importing component checked for free edges and those edges are fixed in midsurface. in the given component small button are present and those…

ansa live batch july 2022 aim : For the given Hood model, extract  the mid surface for the inner panel component and  checking the geometrical errors and mesh the mid surface with the given element Quality criteria. procedure : for the given component is hood model in that we have to extract mid surface…

3D Meshing (Volume Mesh) with tetra elements of a Rearview Mirror using ANSA Aim: For the given Rear view mirror component, check for the geometrical errors and mesh the Surfaces with the given 2D element Quality criterias given below.  objective:  geometrical checks  mid surface creation generate 2d…

Aim : the given Plastic Bottle Cap model, generate the suitable mid surface and mesh the component with  given quality criteria and assign the thickness. Objective: check for the geometrical errors. generate suitable mid surface. mesh generation with given quality criteria. assign thickness for the component.…

tool test 2

tool test 1 for plastic model 4 hr  for sheet metal  3hr 

obijective: for the given Rear door FE model, Create and Apply different PIDs for different components and perform the suitable connections. First we will discuss about the some 1d connection  what is connection?   Elements that transfer forces between the bolts and the assemblies are called connections.…

objective: Practice all the Morphing techniques that were shown in the video for Model-1.  Perform morphing for the Model-2 and Increase the Height of the Dog houses and Ribs. (Refer Red annotations in the below image to understand what are Dog houses and Ribs). procedure : model 1 import the model 1 and do the topo…