Aim - Creating a 3D rendered model for a Residential Building in AutoCad Introduction - for 3D rendering i used the plan which i created while autocad project 1. I 3d modelled that plan and redered it using AutoCAD 3D commands Procedure - 1. open Autocad 2. open the plan and switch to 3d modelling workspace 3. then…
Sneha Alatagi
updated on 29 Sep 2022
Project Details
Leave a comment
Thanks for choosing to leave a comment. Please keep in mind that all the comments are moderated as per our comment policy, and your email will not be published for privacy reasons. Please leave a personal & meaningful conversation.
Other comments...
Read more Projects by Sneha Alatagi (26)
Project 1_Comparative study of different storey buildings for Seismic forces
Aim - Comparative study of different storey buildings for Seismic forces. Introduction - studying the Factors influencing the dynamic characteristics of a building, Factors influencing the Natural Period of a building, Factors influencing the Mode shape of oscillations Procedure - we need to create 10 different…
22 Jan 2023 08:41 AM IST
Modelling of 25 storey building with the specified properties using ETABS
Aim - Modelling of 25 storey building with the specified properties using ETABS Introduction - Model a 25 storey building on ETABS with structural properties as specified below. Ground floor or plinth floor level can be taken at a height of 1.5 metres from the base. Each of the successive 25 storeys has a storey…
20 Jan 2023 11:23 AM IST
Conceptual design of a building with columns and shear walls
Q.1 Aim - Conceptual design of a building with columns and shear walls Restraint of Floor shrinkage Observation - For option (a)- Full restraints are provided at all corners For option (b)- all the Corners are left free but there are restraints provided along the edge For option (c) - There are Non-uniform restraints…
15 Jan 2023 05:09 PM IST
Concept on positioning of Columns
1. Aim - Understanding Concept on positioning of Columns Comment on framing plan in X direction with respect to symmetry -If we divide the plan vertically in the middle both the sides look mirrored so we can say the given plan is symmetric in X directionComment on framing plan in Y direction with respect to symmetry…
13 Jan 2023 03:30 PM IST
Identification of Cracks
Q.1 A) Observation - Concrete is crushed and the reinforcement is visibleConcrete spalled beyond the reinforcement which may be sign of ruptureNo damage has found on the top of the beam because of the flange advantage from slabThe cracks are developed from the bottom that means bar yielding occurred in support bottom only…
26 Dec 2022 12:47 PM IST
Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork
Q.1 Aim - Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork Introduction - Export the Revit architecture and structure model to Navisworks Cache file Procedure - 1. first open revit and open the file you want to export 2. once the file is open go to the 3D view of the model 3. then go to file…
18 Dec 2022 12:32 PM IST
Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo
Q.1 Aim - Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric tower using Dynamo Introduction - Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. Procedure - To create sinusoidal curves first open Revit then go to the…
09 Dec 2022 02:39 PM IST
Creating Architectural and Structural model with 3D rendering using REVIT
(Note - I am submitting this challenge for 2nd time now. yesterday i submitted it but it is showing as not submitted.) Q.1 Select the type of structure you want to build from one of the three below: a. Multi-Unit Residential Apartment b. Office Buildings …
22 Nov 2022 12:05 PM IST
Creating Architectural and Structural model with 3D rendering using REVIT
Q.1 Select the type of structure you want to build from one of the three below: a. Multi-Unit Residential Apartment b. Office Buildings c. School I selected primary school building. Q.2 Assume reasonable assumptions for geographic and…
21 Nov 2022 04:54 PM IST
3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT
Q.1 Aim - 3D Creation of Celing for a house plan using REVIT Introduction - Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level Procedure - 1.open the model created in the week 3 challenge 2.then…
31 Oct 2022 11:03 AM IST
Project 2_Creating a 3D rendered model for a Residential Building in AutoCad
Aim - Creating a 3D rendered model for a Residential Building in AutoCad Introduction - for 3D rendering i used the plan which i created while autocad project 1. I 3d modelled that plan and redered it using AutoCAD 3D commands Procedure - 1. open Autocad 2. open the plan and switch to 3d modelling workspace 3. then…
29 Sep 2022 04:22 PM IST
Creating 3D Isometric view of various structural elements in AutoCAD
Q.1 Aim - Creating 3D Isometric view of various structural elements in AutoCAD Introduction - draw the plan and elevation of the plan as shown in fig by using AutoCAD 3D cammands Procedure - 1. open auto cad 2. set the work space to 3d modelling 3. then prepare 2d plan as shown in fig 4. then extrude the…
26 Sep 2022 06:01 PM IST
Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad
Q.1 Aim - Creating 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad Introduction - creating furniture in 3D AutoCAD using necessary coomands Procedure - 1. open AutoCAD 2. set the units 3. set the workspace to 3d modelling 4.by using polysolid…
23 Sep 2022 07:42 AM IST
Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad
Q.1 Aim - Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad Introduction - create the layout of drawings using multiple view ports and template Procedure - 1. open the drawing of which u want to create the layout 2. then set the page through page setup manager…
20 Sep 2022 07:00 AM IST
Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad
Q.1 Aim - Creating Kitchen layout in AutoCAD Introduction - created kitchen layout by using line, offset, fillet, extend and then hatched the drawing as shown in the fig Procedure- 1. open autocad 2. set the units 3.draw the kitchen layout as shown in fig 4. use the given dimension and by using…
17 Sep 2022 02:26 PM IST
Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad
Q.1 Aim - Create the templates as shown in Figures. Introduction - prepare the drawing template as shown in fig. and then make it it a block. Procedure - 1. open the autoCAD 2. set the units 3. prepare the table as shown in fig with the help of line 4. then use single line text and fill the content in…
10 Sep 2022 11:16 AM IST
Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings
Aim - Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings. Introduction - Create architectural plan in plot size 18.3m X 6m and facing east use different tools to draw the plan and then using proper dimension techniques give the dimension. draw structural drawing.…
04 Sep 2022 06:21 AM IST
Creating a Layout, Section and Elevation with dimensions using AutoCad
Aim - Creating a Layout, Section and Elevation with dimensions using AutoCad Introduntion - create plan and sections using line, x line, dimensions, text, leader commands and trim, offset, copy, fillet etc. modication commands. Procedure - 1. open the AutoCAD software 2. start with setting the units to decimal 3.…
30 Aug 2022 05:53 PM IST
Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad
Q.1 Aim - Creating a Wardrobe detailed drawing using AutoCAD. Introduction - Draw warbrobe by using different commands like line rectangle and modification command like offset, fillet, trim and then provide proper dimensions. Procedure - 1.open autoCAD 2.set the units to decimal 3.start with drawing the front…
23 Aug 2022 09:01 AM IST
Creation of Column Schedule and Drawing Template using AutoCad
Q.1 Aim - Create a column schedule as shown in the figure. Introduction - Create a column schedule using line and text commands. Procedure - 1. open the AutoCAD 2.Set the units to imperial 3.Prepare the table by using line command 4. Create a new text style font name: romans.shx; Height: 8”,…
13 Aug 2022 08:47 AM IST
Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad
Q.1 Aim - Creating a Residence Layout using AutoCad Introduction - Drew residence layout using layers, line command etc. modification commands like offset, fillet, trim, extend etc. Procedure - 1.open AutoCAD 2. set the units to engineering. 3.first draw x line vertical and horizontal. 4.then offset…
08 Aug 2022 06:22 AM IST
Drafting of various geometries using Chamfer, Fillet tool in AutoCad
Q.1 Aim - Drafting various geometries using AutoCAD commands. Introduction - Drew given geometry by using line and circle command. Procedure - 1. open AutoCAD 2. set the units to decimal 3.By using line command first draw 3.00 line 4.then by using polar snapping 45,90,135.. draw the inclined line 2.12 length…
04 Aug 2022 10:41 AM IST
Creating a Floor plan, Footing detail and Isometric view using AutoCad
Q.1 Aim - Drawing c/s of load bearing wall by using AutoCAD Itroduction - using necessary commands like, line, rectangle, polyline and modification tools copy, etc. i drew c.s of load bearing wall. Procedure - 1. read the drawing carefully. see for all the dimensions needed to draw the fig. 2. open autoCAD…
01 Aug 2022 01:42 PM IST
Creation of geometries by Coordinate system methods using AutoCad
Q.1 P1 using all the coordinates system methods - Absolute coordinate system - Relative coordinate system - Relative polar coordinate system - Q.2 P2 using all the coordinates system methods - Absolute coordinate system - Relative coordinate system - Q.3 P4 - …
29 Jul 2022 08:41 AM IST
Sketch a G+1 residential plan according to Vaastu Shastra and Calculation of Loads as per IS code
G+1 floor residential plan, according to Vaastu Shastra list down the names of the structural drawings required to be provided to the site for construction - Centre line drawing - Footing and Column layout with reinforcement details - Column Schedule with reinforcement details - Plinth beam layout with reinforcement…
22 Jul 2022 09:27 AM IST
Project on Concrete Mix Design for various grades of Concrete
Design of concrete mix of M30 grade using fly ash – Required Data – Cement – Type of cement OPC (43 grade) Specific gravity 3.15 Max cement content IS 456:2000 Cl.8.2.4.2 Site Condition – Exposure Severe Workability 120mm Method of placing Pumping Degree of supervision Good Admixture…
09 Jul 2022 03:58 PM IST